D-Link xStack DGS-3426 Page 327 User Manual Download

Page: 327 / 356

Technical Support

You can find software updates and user documentation on the D-Link

website.

D-Link provides free technical support for customers within the United

States and within Canada for the duration of the service period, and

warranty confirmation service, during the warranty period on this product.

U.S. and Canadian customers can contact D-Link technical support through

our website, or by phone.

Tech Support for customers within the United States:

D-Link Technical Support over the Telephone:

(877) 354-6555

Monday to Friday 8:00am to 5:00pm PST

D-Link Technical Support over the Internet:

http://support.dlink.com

email:[email protected]

Tech Support for customers within Canada:

D-Link Technical Support over the Telephone:

1-800-361-5265

Monday to Friday 7:30am to 9:00pm EST

D-Link Technical Support over the Internet:

http://support.dlink.com

email: [email protected]

Summary of Contents for xStack DGS-3426





































































































































































































































































































































































Search results

Summary of Contents for xStack DGS-3426

Reviews:

Related manuals for xStack DGS-3426

Brands by name

Popular brands

D-Link xStack DGS-3426, User Manual

Search results

Summary of Contents for xStack DGS-3426

Reviews:

Related manuals for xStack DGS-3426

Brands by name

Popular brands