D-Link xStack DGS-3426, User Manual

Page: 243 / 356

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
229
The following parameters may be viewed or set:
Parameter Description
Settings
State Use the pull-down menu to globally enable or disable the MAC-Based Access Control
function on the Switch.
Method Use the pull-down menu to choose the type of authentication to be used when
authentication MAC addresses on a given port. The user may choose between the
following methods:
Local
– Use this method to utilize the locally set MAC address database as the
authenticator for MAC-Based Access Control. This MAC address list can be
configured in the MAC-Based Access Control Local Database Settings window.
RADIUS
– Use this method to utilize a remote RADIUS server as the authenticator for
MAC-Based Access Control. Remember, the MAC list must be previously set on the
RADIUS server and the settings for the server must be first configured on the Switch.
Password Enter the password for the RADIUS server, which is to be used for packets being sent
requesting authentication. The default password is “default”.
Guest VLAN Displays the name of the previously configured Guest VLAN being used for this
function. Clicking the hyperlinked name will send the web manager to Guest VLAN
configuration screen for MAC-Based Authentication.
Guest VLAN ID Displays the VLAN ID of the previously configured Guest VLAN being used for this
function. Clicking the hyperlinked Guest VLAN ID will send the web manager to Guest
VLAN configuration screen for MAC-Based Authentication.
Guest VLAN Member Ports Displays the list of ports that have been configured for the Guest VLAN.
Port Settings
From Port/To Port Enter the Port range.
State Use the pull-down menu to enable or disable the MAC-Based Access Control function
on individual ports.
MAC Based Access Control Local MAC Settings
The following window is used to set a list of MAC addresses, along with their corresponding target VLAN, which will be
authenticated for the Switch. Once a queried MAC address is matched in this table, it will be placed in the VLAN associated with
it here. The switch administrator may enter up to 128 MAC addresses to be authenticated using the local method configured here.
To enable the MAC Based Access Control Local MAC Settings on the switch, click
Security > MAC Based Access Control >
MAC Based Access Control Local MAC Settings