D-Link xStack DGS-3426, User Manual

Page: 177 / 356

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 7- 50. Setup Static Multicast Forwarding Table window
The following parameters can be set:
Parameter Description
Unit Select the switch in the switch stack to be modified.
VID The VLAN ID of the VLAN the corresponding MAC address belongs to.
Multicast MAC
Address The MAC address of the static source of multicast packets. This must be a multicast MAC
address.
Port Settings Allows the selection of ports that will be members of the static multicast group and ports that
are either forbidden from joining dynamically, or that can join the multicast group dynamically,
using GMRP. The options are:
None
- No restrictions on the port dynamically joining the multicast group. When None is
chosen, the port will not be a member of the Static Multicast Group.
Egress
- The port is a static member of the multicast group.
Click Apply to implement the changes made. To delete an entry in the Static Multicast Forwarding Table, click the corresponding
under the Delete heading. Click the Show All Multicast Forwarding Entries link to return to the Static Multicast Forwarding
Settings window.
Multicast Filtering Mode
To view this window click, L2 Features > Forwarding & Filtering > Multicast Filtering Mode :
Figure 7- 51. Multicast Filtering Mode
163