D-Link xStack DGS-3426, User Manual

Page: 147 / 356

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 7- 19. Link Aggregation Settings window - Modify
The user-changeable parameters are as follows:
Parameter Description
Group ID Select an ID number for the group, between
1
and 32.
State Trunk groups can be toggled between
Enabled
and
Disabled
. This is used to turn a port
trunking group on or off. This is useful for diagnostics, to quickly isolate a bandwidth
intensive network device or to have an absolute backup aggregation group that is not under
automatic control.
Master Port Choose the Master Port for the trunk group using the pull-down menu.
Unit Select the switch in the switch stack to be modified.
Member Ports Choose the members of a trunked group. Up to eight ports per group can be assigned to a
group.
Flooding Port A trunking group must designate one port to allow transmission of broadcasts, multicasts and
unknown unicasts.
Active Port Shows the port that is currently forwarding packets.
Type This pull-down menu allows users to select between
Static
and
LACP
(Link Aggregation
Control Protocol). LACP allows for the automatic detection of links in a Port Trunking Group.
133