xStack Gigabit Layer 3 Switch Command Line Interface Manual
config system_severity
•
critical –
Entering this parameter along with the proper
destination, stated above, will instruct the Switch to send only
critical events to the Switch’s log or SNMP agent.
•
warning –
Entering this parameter along with the proper
destination, stated above, will instruct the Switch to send
critical and warning events to the Switch’s log or SNMP agent.
•
information
– Entering this parameter along with the proper
destination, stated above, will instruct the switch to send
informational, warning and critical events to the Switch’s log or
SNMP agent.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure the system severity:
DGS-3324SRi:4#config system_severity trap critical
Command: config system_severity trap critical
Success.
DGS-3324SRi:4#
show system_severity
Purpose
To display the current severity settings set on the Switch.
Syntax
show system_severity
Description
This command is used to view the severity settings that have been
implemented on the Switch using the
config system_severity
command.
Parameters None.
Restrictions None.
Example usage:
To view the system severity settings currently implemented on the Switch:
DGS-3324SRi:4#show system_severity
Command: show system_severity
system_severity log : information
system_severity trap : criticial
DGS-3324SRi:4#
76
