xStack Gigabit Layer 3 Switch Command Line Interface Manual
To enable the SNTP function:
DGS-3324SRi:4#enable sntp
Command: enable sntp
Success.
DGS-3324SRi:4#
disable sntp
Purpose
Disables SNTP server support.
Syntax
disable sntp
Description
This will disable SNTP support. SNTP service must be separately
configured (see config sntp).
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example:
To stop SNTP support:
DGS-3324SRi:4#
DGS-3324SRi:4#disable sntp
Command: disable sntp
Success.
config time
Purpose
Used to manually configure system time and date settings.
Syntax
config time date <date ddmthyyyy> <time hh:mm:ss>
Description
This will configure the system time and date settings. These will
be overridden if SNTP is configured and enabled.
Parameters
date
– Express the date using two numerical characters for the
day of the month, three alphabetical characters for the name of
the month, and four numerical characters for the year. For
example: 03aug2003.
time
– Express the system time using the format hh:mm:ss, that is,
two numerical characters each for the hour using a 24-hour clock,
the minute and second. For example: 19:42:30.
Restrictions Only
administrator-level
users can issue this command. Manually
configured system time and date settings are overridden if SNTP
support is enabled.
Example usage:
256