xStack Gigabit Layer 3 Switch Command Line Interface Manual
Command Parameters
statistics
show auth_statistics
{ports [<portlist> | all]}
Each command is listed, in detail, in the following sections.
enable 802.1x
Purpose
Used to enable the 802.1x server on the Switch.
Syntax
enable 802.1x
Description
The
enable 802.1x
command enables the 802.1x Network
Access control server application on the Switch. To select
between port-based or MAC-based, use the
config 802.1x
auth_mode
command.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To enable 802.1x switch wide:
DGS-3324SRi:4#enable 802.1x
Command: enable 802.1x
Success.
DGS-3324SRi:4#
disable 802.1x
Purpose
Used to disable the 802.1x server on the Switch.
Syntax
disable 802.1x
Description
The
disable 802.1x
command is used to disable the 802.1x
Network Access control server application on the Switch. To
select between port-based or MAC-based, use the
config
802.1x auth_mode
command.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To disable 802.1x on the Switch:
DGS-3324SRi:4#disable 802.1x
Command: disable 802.1x
Success.
DGS-3324SRi:4#
200
