xStack Gigabit Layer 3 Switch Command Line Interface Manual
DGS-3324SRi:4#show log index 1-4
Command: show log index 1-4
Index Date Time Log Text
----- ---------- -------- -----------------------------------------------------
4 2000-03-02 01:54:53 Port 1:13 link up, 100Mbps FULL duplex
3 2000-03-02 01:54:53 Spanning Tree Protocol is enabled
2 2000-03-02 01:54:53 Unit 1, System started up
1 2000-02-28 06:06:09 Spanning Tree Protocol is disabled
DGS-3324SRi:4#
enable syslog
Purpose
Used to enable the system log to be sent to a remote host.
Syntax
enable syslog
Description
The
enable syslog
command enables the system log to be sent
to a remote host.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To the syslog function on the Switch:
DGS-3324SRi:4#enable syslog
Command: enable syslog
Success.
DGS-3324SRi:4#
disable syslog
Purpose
Used to disable the system log function on the Switch.
Syntax
disable syslog
Description
The
disable syslog
command disables the system log function on
the Switch. After disabling, Syslog entries will no longer be sent to
a remote host.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To disable the syslog function on the Switch:
65
