xStack Gigabit Layer 3 Switch Command Line Interface Manual
DGS-3324SRi:4#config dnsr add static dns1 10.43.21.12
Command: config dnsr add static dns1 10.43.21.12
Success.
DGS-3324SRi:4#
Example Usage:
To delete an entry domain name dns1, IP address 10.43.21.12 from DNS static table.
DGS-3324SRi:4#config dnsr delete static dns1 10.43.21.12
Command: config dnsr delete static dns1 10.43.21.12
Success.
DGS-3324SRi:4#
enable dnsr
Purpose
Used to enable DNS relay.
Syntax
enable dnsr {cache | static}
Description
This command is used, in combination with the
disable dnsr
command below, to enable and disable DNS Relay on the Switch.
Parameters
cache
- This parameter will allow the user to enable the cache
lookup for the DNS rely on the Switch.
static
- This parameter will allow the user to enable the static table
lookup for the DNS rely on the Switch.
Restrictions Only
administrator-level users can issue this command.
Example Usage:
To enable status of DNS relay:
DGS-3324SRi:4#enable dnsr
Command: enable dnsr
Success.
DGS-3324SRi:4#
Example Usage:
To enable cache lookup for DNS relay.
289
