xStack Gigabit Layer 3 Switch Command Line Interface Manual
DGS-3324SRi:4# config scheduling 6 max_packet 0
Command: config scheduling 6 max_packet 0
Success.
DGS-3324SRi:4#
show scheduling
Purpose
Used to display the currently configured traffic scheduling on the
Switch.
Syntax
show scheduling
Description
The
show scheduling
command displays the current
configuration for the maximum number of packets (
max_packets
)
assigned to the seven hardware priority classes
on the Switch. At
this value, it will empty the seven hardware priority classes in
order, from the highest priority (queue 6) to the lowest priority
(queue 0).
Parameters None.
Restrictions None.
Example usage:
To display the current scheduling configuration with Class 1 as the strict priority class of a Combination Queue:
DGS-3324SRi:4# show scheduling
Command: show scheduling
QOS Output Scheduling
MAX. Packets
-------------------
Class-0 1
Class-1 0
Class-2 3
Class-3 4
Class-4 5
Class-5 6
Class-6 7
DGS-3324SRi:4#
config 802.1p user_priority
Purpose
Used to map the 802.1p user priority tags of an incoming packet
to one of the seven hardware priority classes of service available
on the Switch.
108