xStack Gigabit Layer 3 Switch Command Line Interface Manual
enable vrrp
Restrictions Only
administrator-level users can issue this command.
Example Usage:
To enable VRRP globally on the Switch:
DGS-3324SRi:4#enable vrrp
Command: enable vrrp
Success.
DGS-3324SRi:4#
Example usage:
To enable the virtual IP address to be pinged:
DGS-3324SRi:4#enable vrrp ping
Command: enable vrrp ping
Success.
DGS-3324SRi:4#
disable vrrp
Purpose
To disable the VRRP function on the Switch.
Syntax
disable vrrp {ping}
Description
This command will disable the VRRP function on the Switch.
Parameters
{ping}
- Adding this parameter to the command will stop the virtual IP
address from being pinged from other host end nodes to verify
connectivity. This will only disable the ping connectivity check
function. To disable the VRRP protocol on the Switch, omit this
parameter.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To disable the VRRP function globally on the Switch:
DGS-3324SRi:4#disable vrrp
Command: disable vrrp
Success.
DGS-3324SRi:4#
266
