xStack Gigabit Layer 3 Switch Command Line Interface Manual
create 802.1x user
Purpose
Used to create a new 802.1x user.
Syntax
create 802.1x user <username 15>
Description
The
create 802.1x user
command is used to create new 802.1x
users.
Parameters
<username 15>
−
A username of up to 15 alphanumeric
characters in length.
Restrictions Only
administrator-level users can issue this command.
Example Usage:
To create an 802.1x user:
DGS-3324SRi:4#create 802.1x user dtremblett
Command: create 802.1x user dtremblett
Enter a case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DGS-3324SRi:4#
show 802.1x user
Purpose
Used to display the 802.1x user accounts on the Switch.
Syntax
show 802.1x user
The
show 802.1x user
command is used to display the 802.1x
Port-based or MAC-based Network Access control local users
currently configured on the Switch.
Parameters None.
Restrictions None.
Description
Example usage:
To view 802.1X users currently configured on the Switch:
DGS-3324SRi:4#show 802.1x user
Command: show 802.1x user
Current Accounts:
Username Password
-------------- --------------
Darren Trinity
Total entries: 1
DGS-3324SRi:4#
201
