xStack Gigabit Layer 3 Switch Command Line Interface Manual
DGS-3324SRi:4#delete vlan v1
Command: delete vlan v1
Success.
DGS-3324SRi:4#
config vlan add
Purpose
Used to add additional ports to a previously configured VLAN.
Syntax
config vlan <vlan_name 32> {[add [ tagged | untagged |
forbidden] <portlist> | advertisement [enable | disable]}
Description
This command allows you to add ports to the port list of a
previously configured VLAN. You can specify the additional ports
as tagging, untagging, or forbidden. The default is to assign the
ports as untagging.
Parameters
<vlan_name 32>
−
The name of the VLAN you want to add or
delete ports to.
add
−
Specifies which ports to add. The user may also specify if
the ports are:
tagged
−
Specifies the additional ports as tagged.
untagged
−
Specifies the additional ports as untagged.
forbidden
−
Specifies the additional ports as forbidden.
<portlist>
−
A range of ports to add to the VLAN. The port list is
specified by listing the lowest switch number and the beginning
port number on that switch, separated by a colon. Then the
highest switch number, and the highest port number of the range
(also separated by a colon) are specified. The beginning and end
of the port list range are separated by a dash. For example,
1:3
specifies switch number 1, port 3.
2:4
specifies switch number 2,
port 4.
1:3-2:4
specifies all of the ports between switch 1, port 3
and switch 2, port 4
−
in numerical order.
advertisement [enable | disable]
−
Enables or disables GVRP on
the specified VLAN.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To add 4 through 8 of module 2 as tagged ports to the VLAN v1:
DGS-3324SRi:4#config vlan v1 add tagged 2:4-2:8
Command: config vlan v1 add tagged 2:4-2:8
Success.
DGS-3324SRi:4#
124
