xStack Gigabit Layer 3 Switch Command Line Interface Manual
show authen_enable
Purpose
Used to display the method list of authentication methods for
promoting normal user level privileges to Administrator level privileges
on the Switch.
Syntax
show authen_enable [default | method_list_name <string 15> | all]
Description
This command is used to delete a user-defined method list of
authentication methods for promoting user level privileges to
Administrator level privileges. The window will display the following
parameters:
Parameters
default
– Entering this parameter will display the default method list for
users attempting to gain access to Administrator level privileges on the
Switch.
method_list_name <string 15>
– Enter an alphanumeric string of up to
15 characters to define the given
method list
to view.
all
– Entering this parameter will display all the authentication login
methods currently configured on the Switch.
Restrictions None.
Method List Name – The name of a previously configured
method list name.
Priority – Defines which order the method list protocols will be
queried for authentication when a user attempts to log on to
the Switch. Priority ranges from 1(highest) to 4 (lowest).
Method Name – Defines which security protocols are
implemented, per method list name.
Comment – Defines the type of Method.
User-defined Group
refers to
server groups
defined by the user.
Built-in Group
refers to the TACACS/XTACACS/ and RADIUS
security protocols which are permanently set in the Switch.
Keyword
refers to authentication using a technique INSTEAD
of TACACS/XTACACS/ and RADIUS which are
local (authentication through the
local_enable
password on
the Switch) and none (no authentication necessary to access
any function on the Switch).
Example usage:
To display all method lists for promoting user level privileges to administrator level privileges.
171