xStack Gigabit Layer 3 Switch Command Line Interface Manual
disable telnet
Purpose
Used to disable the Telnet protocol on the Switch.
Syntax
disable telnet
Description
This command is used to disable the Telnet protocol on the
Switch.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To disable the Telnet protocol on the Switch:
DGS-3324SRi:4#disable telnet
Command: disable telnet
Success.
DGS-3324SRi:4#
enable web
Purpose
Used to enable the HTTP-based management software on the
Switch.
Syntax
enable web <tcp_port_number 1-65535>
Description
This command is used to enable the Web-based management
software on the Switch. The user can specify the TCP port
number the Switch will use to listen for Telnet requests.
Parameters
<tcp_port_number 1-65535>
−
The TCP port number. TCP ports
are numbered between 1 and 65535. The “well-known” port for
the Web-based management software is 80.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To enable HTTP and configure port number:
DGS-3324SRi:4#enable web 80
Command: enable web 80
Note: SSL will be disabled if web is enabled.
Success.
DGS-3324SRi:4#
22
