xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
49
Success.
DES-3800:4#
config snmp system_location
Purpose
Used to enter a description of the location of the Switch.
Syntax
config snmp system_location <sw_location>
Description The
config snmp system_location
command is used to enter a
description of the location of the Switch. A maximum of 255
characters can be used.
Parameters
<sw_location>
- A maximum of 255 characters is allowed. A NULL
string is accepted if there is no location desired.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure the Switch location for “
H Q 5 F
”:
DES-3800:4#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DES-3800:4#
config snmp system_name
Purpose
Used to configure the name for the Switch.
Syntax
config snmp system_name <sw_name>
Description The
config snmp system_name
command configures the name of
the Switch.
Parameters
<sw_name>
- A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure the Switch name for “
D E S- 3828 Swit ch
”:
DES-3800:4#config snmp system_name DES-3828 Switch
Command: config snmp system_name DES-3828 Switch
Success.
DES-3800:4#
