xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
305
config sim
Switch.
Syntax
config sim [{[ commander {group_name <groupname 64> |
candidate] | dp_interval <sec 30-90> | hold_time <sec 100-
255>]}
Description
This command is used to configure parameters of switches of the
SIM.
Parameters
commander
– Use this parameter to configure the commander
switch(CS) for the following parameters:
group_name <groupname 64>
- Used to update the name
of the group. Enter an alphanumeric string of up to 64
characters to rename the SIM group.
dp_interval <30-90>
– The user may set the discovery
protocol interval, in seconds that the Switch will send out
discovery packets. Returning information to the CS will
include information about other switches connected to it.
(Ex. MS, CaS). The user may set the
dp_interval
from 30 to
90 seconds.
hold time <sec 100-255>
– Using this parameter, the user
may set the time, in seconds, the CS will hold information
sent to it from other switches, utilizing the discovery interval
protocol. The user may set the hold time from 100 to 255
seconds.
candidate
– Used to change the role of a CS (commander) to a
CaS (candidate).
dp_interval
<30-90>
– The user may set the discovery
protocol interval, in seconds that the Switch will send out
discovery packets. Returning information to the CS will
include information about other switches connected to it.
(Ex. MS, CaS). The user may set the
dp_interval
from 30 to
90 seconds.
hold time <100-255>
– Using this parameter, the user may
set the time, in seconds, the Switch will hold information
sent to it from other switches, utilizing the discovery interval
protocol. The user may set the hold time from 100 to 300
seconds.
Restrictions Only
administrator-level users can issue this command.
To change the time interval of the discovery protocol:
DES-3800:4# config sim commander
Command: config sim commander
Success.
DES-3800:4#
To change the hold time of the discovery protocol:
DES-3800:4# config sim hold_time 120
Command: config sim hold_time 120
Success.
