xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
156
Config 802.1x init
Purpose
Used to initialize the 802.1x function on a range of ports.
Syntax
config 802.1x init {port_based ports [<portlist> | all] |
mac_based [ports] [<portlist> | all] {mac_address <macaddr>}]
Description The
config 802.1x init
command is used to immediately initialize the
802.1x functions on a specified range of ports or for specified MAC
addresses operating from a specified range of ports.
Parameters
port_based
– This instructs the Switch to initialize 802.1x functions
based only on the port number. Ports approved for initialization can
then be specified.
mac_based
−
This instructs the Switch to initialize 802.1x functions
based only on the MAC address. MAC addresses approved for
initialization can then be specified.
ports <portlist>
−
Specifies a port or range of ports to be configured.
all
−
Specifies all of the ports on the Switch.
mac_address <macaddr>
- Enter the MAC address to be initialized.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To initialize the authentication state machine of all ports:
DES-3800:4# config 802.1x init port_based ports all
Command: config 802.1x init port_based ports all
Success.
DES-3800:4#
config 802.1x reauth
Purpose
Used to configure the 802.1x re-authentication feature of the Switch.
Syntax
config 802.1x reauth {port_based ports [<portlist> | all] |
mac_based [ports] [<portlist> | all] {mac_address <macaddr>}]
Description
The config 802.1x reauth command is used to re-authenticate a
previously authenticated device based on port number.
Parameters
port_based
– This instructs the Switch to re-authorize 802.1x functions
based only on the port number. Ports approved for re-authorization
can then be specified.
mac_based
−
This instructs the Switch to re-authorize 802.1x functions
based only on the MAC address. MAC addresses approved for re-
authorization can then be specified.
ports <portlist>
−
Specifies a port or range of ports to be re-authorized.
all
−
Specifies all of the ports on the Switch.
mac_address <macaddr>
- Enter the MAC address to be re-
authorized.
Restrictions Only
administrator-level users can issue this command.
Example usage:
