xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
33
To delete a previously entered SNMP user on the Switch:
DES-3800:4#delete snmp user dlink
Command: delete snmp user dlink
Success.
DES-3800:4#
show snmp user
Purpose
Used to display information about each SNMP username in the
SNMP group username table.
Syntax
show snmp user
Description The
show snmp user
command displays information about each
SNMP username in the SNMP group username table.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To display the SNMP users currently configured on the Switch:
DES-3800:4#show snmp user
Command: show snmp user
Username Group Name SNMP Version Auth-Protocol PrivProtocol
--------------- -------------- ------------ ----------------- -----------------
initial initial V3 None None
Total Entries: 1
DES-3800:4#
create snmp view
Purpose
Used to assign views to community strings to limit which MIB objects
and SNMP manager can access.
Syntax
create snmp view <view_name 32> <oid> view_type [included |
excluded]
Description The
create snmp view
command assigns views to community
strings to limit which MIB objects an SNMP manager can access.
Parameters
<view_name 32>
−
An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be created.
<oid>
−
The object ID that identifies an object tree (MIB tree) that will
be included or excluded from access by an SNMP manager.
view type
– Sets the view type to be:
•
included
−
Include this object in the list of objects that an
SNMP manager can access.
