xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
157
To configure 802.1x reauthentication for ports 1-18:
DES-3800:4#config 802.1x reauth port_based ports 1-18
Command: config 802.1x reauth port_based ports 1-18
Success.
DES-3800:4#
config radius add
Purpose
Used to configure the settings the Switch will use to communicate with a
RADIUS server.
Syntax
config radius add <server_index 1-3> <server_ip> key <passwd 32>
[default | {auth_port <udp_port_number 1-65535> | acct_port
<udp_port_number 1-65535>}]
Description The
config radius add
command is used to configure the settings the
Switch will use to communicate with a RADIUS server.
Parameters
<server_index 1-3>
−
Assigns a number to the current set of RADIUS
server settings. Up to 3 groups of RADIUS server settings can be entered
on the Switch.
<server_ip>
−
The IP address of the RADIUS server.
key
−
Specifies that a password and encryption key will be used between
the Switch and the Radius server.
<passwd 32>
−
The shared-secret key used by the RADIUS server and
the Switch. Up to 32 characters can be used.
default
−
Uses the default udp port number in both the “auth_port” and
“acct_port” settings.
auth_port <udp_port_number 1-65535>
−
The UDP port number for
authentication requests. The default is 1812.
acct_port <udp_port_number 1-65535>
−
The UDP port number for
accounting requests. The default is 1813.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure the RADIUS server communication setttings:
DES-3800:4#config radius add 1 10.48.74.121 key dlink default
Command: config radius add 1 10.48.74.121 key dlink default
Success.
DES-3800:4#
config radius delete
