D-Link xStack DES-3800 Series, Cli Manual

Page: 267 / 326

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
262
config authen_login
XTACACS protocol from the remote XTACACS server hosts of the XTACACS
server group list.
– Adding this parameter will require the user to be authenticated using the
protocol from the remote server hosts of the
server group list.
radius - Adding this parameter will require the user to be authenticated using the
RADIUS protocol from the remote RADIUS server hosts of the RADIUS server
group list.
server_group <string 15> - Adding this parameter will require the user to be
authenticated using a user-defined server group previously configured on the
Switch.
local - Adding this parameter will require the user to be authenticated using the
local user account database on the Switch.
none – Adding this parameter will require no authentication to access the sSwitch.
method_list_name – Enter a previously implemented method list name defined by the user.
The user may add one, or a combination of up to four (4) of the following authentication
methods to this method list:
tacacs – Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.
xtacacs – Adding this parameter will require the user to be authenticated using the
XTACACS protocol from a remote XTACACS server.
– Adding this parameter will require the user to be authenticated using the
protocol from a remote server.
radius - Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
server_group <string 15> - Adding this parameter will require the user to be
authenticated using a user-defined server group previously configured on the
Switch.
local - Adding this parameter will require the user to be authenticated using the
local user account database on the Switch.
none – Adding this parameter will require no authentication to access the Switch.
NOTE: Entering none or local as an authentication protocol will override any other
authentication that follows it on a method list or on the default method list.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the user defined method list “Trinity” with authentication methods tacacs, xtacacs
and local, in that order.
DES-3800:4#config authen_login method_list_name Trinity method
tacacs xtacacs local
Command: config authen_login method_list_name Trinity method tacacs
xtacacs local
Success.
DES-3800:4#