xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
54
config firmware
Purpose
Used to configure the firmware section as a boot up section, or to
delete the firmware section
Syntax
config firmware image_id <int 1-2> [delete | boot_up]
Description
This command is used to configure the firmware section. The user
may choose to remove the firmware section or use it as a boot up
section.
Parameters
image_id
– Specifies the working section. The Switch can hold two
firmware versions for the user to select from, which are specified by
image ID.
<int 1-2>
- Select the ID number of the firmware in the Switch’s
memory to be configured.
delete
– Entering this parameter will delete the specified firmware
section.
boot_up
– Entering this parameter will specify the firmware image ID
as a boot up section.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure firmware section 1 as a boot up section:
DES-3800:4# config firmware section_id 1 boot_up
Command: config firmware section_id 1 boot_up
Success.
DES-3800:4#
show firmware information
Purpose
Used to display the firmware section information.
Syntax
show firmware information
Description
This command is used to display the firmware section information
Parameters None.
Restrictions None
Example usage:
To display the current firmware information on the Switch:
DES-3800:4#show firmware information
Command: show firmware information
ID Version Size(B) Update Time From User
-- -------- ------- ------------------- ------------------ ---------------
1 2.00-B19 1360471 00000 days 00:00:00 Serial Port (PROM) Unknown
*2 1.00-B21 2052372 00000 days 00:00:56 10.53.13.94 Anonymous