xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
253
38
MAC Notification Commands
The MAC notification commands in the Command Line Interface (CLI) are listed, in the following table,
along with their appropriate parameters.
Command Parameters
enable mac_notification
disable mac_notification
config mac_notification
{interval <int 1-2147483647> | historysize <int 1-500>
config mac_notification
ports
[<portlist> | all] [enable | disable]
show mac_notification
show mac_notification
ports
<portlist>
Each command is listed, in detail, in the following sections.
enable mac_notification
Purpose
Used to enable global MAC address table notification on the
Switch.
Syntax
enable mac_notification
Description
This command is used to enable MAC address notification without
changing configuration.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example Usage:
To enable MAC notification without changing basic configuration:
DES-3800:4#enable mac_notification
Command: enable mac_notification
Success.
DES-3800:4#
disable mac_notification
Purpose
Used to disable global MAC address table notification on the Switch.
Syntax
disable mac_notification
Description
This command is used to disable MAC address notification without
changing configuration.
Parameters None.
