xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
153
11 ForceAuth Success Authorized
12 ForceAuth Success Authorized
13 ForceAuth Success Authorized
14 ForceAuth Success Authorized
15 ForceAuth Success Authorized
16 ForceAuth Success Authorized
17 ForceAuth Success Authorized
18 ForceAuth Success Authorized
19 ForceAuth Success Authorized
20 ForceAuth Success Authorized
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
Enter
Next Entry
a
All
Example usage:
To display the 802.1x auth state for MAC-based 802.1x:
DES-3800:4#show 802.1x auth_state
Command: show 802.1x auth_state
Port number : 1:1
Index MAC Address Auth PAE State Backend State Port Status
------ ------------------- ----------------------- --------------------- -----------------
1 00-08-02-4E-DA-FA Authenticated Idle Authorized
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
Enter
Next Entry
a
All
Config 802.1x auth_mode
Purpose
Used to configure the 802.1x authentication mode on the Switch.
Syntax
config 802.1x auth_mode {port_based | mac_based]
Description
The config 802.1x authentication mode command is used to enable
either the port-based or MAC-based 802.1x authentication feature
on the Switch.
