xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
287
Enter the new password again for conformation:*******
Success.
DES-3800:4#
show ssh user
Purpose
Used to display the SSH user setting.
Syntax
show ssh user
Description
This command allows you to display the current SSH user setting.
Parameters None.
Restrictions None.
Example usage:
To display the SSH user:
DES-3800:4#show ssh user
Command: show ssh user
Current Accounts:
UserName Authentication
-------------------------- --------------------------
Trinity Publickey
DES-3800:4#
Note
: To configure the SSH user, the administrator must
create a user account on the Switch. For information
concerning configuring a user account, please see the section
of this manual entitled
Basic Switch Commands
and then
the command,
create user account
.
config ssh algorithm
Purpose
Used to configure the SSH algorithm.
Syntax
config ssh algorithm [3DES | AES128 | AES192 | AES256 | arcfour |
blowfish | cast128 | twofish128 | twofish192 | twofish256 | MD5 | SHA1 |
RSA | DSA] [enable | disable]
Description
This command allows you to configure the desired type of SSH algorithm
used for authentication encryption.
Parameters
3DES
– This parameter will enable or disable the Triple_Data Encryption
Standard encryption algorithm.
AES128
- This parameter will enable or disable the Advanced Encryption
Standard AES128 encryption algorithm.
