xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
255
config mac_notification ports
Parameters
<portlist>
- Specify a port or range of ports to be configured.
all
– Entering this command will set all ports on the system.
[enable | disable]
– These commands will enable or disable MAC address table
notification on the Switch.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To enable port 7 for MAC address table notification:
DES-3800:4#config mac_notification ports 7 enable
Command: config mac_notification ports 7 enable
Success.
DES-3800:4#
show mac_notification
Purpose
Used to display the Switch’s MAC address table notification global
settings
Syntax
show mac_notification
Description
This command is used to display the Switch’s MAC address table
notification global settings.
Parameters None.
Restrictions None.
Example usage:
To view the Switch’s MAC address table notification global settings:
DES-3800:4#show mac_notification
Command: show mac_notification
Global Mac Notification Settings
State : Enabled
Interval : 1
History Size : 1
DES-3800:4#
show mac_notification ports
Purpose
Used to display the Switch’s MAC address table notification status
tti