xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
75
Command Parameters
config stp instance _id <value 1-4> [add_vlan | remove_vlan] <vidlist>
delete stp instance_id
<value 1-4>
config stp priority
<value 0-61440> instance_id <value 0-4>
config stp
mst_config_id
{revision_level <int 0-65535> | name <string>}
config stp mst_ports
<portlist> instance_id <value 0-> {internalCost [auto | value 1-
200000000] | priority <value 0-240>}
show stp
show stp ports
{<portlist>}
show stp instance_id
{<value 0-4>}
show stp mst_config id
Each command is listed, in detail, in the following sections.
enable stp
Purpose
Used to globally enable STP on the Switch.
Syntax
enable stp
Description
This command allows the Spanning Tree Protocol to be globally
enabled on the Switch.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To enable STP, globally, on the Switch:
DES-3800:4#enable stp
Command: enable stp
Success.
DES-3800:4#
disable stp
Purpose
Used to globally disable STP on the Switch.
Syntax
disable stp
Description
This command allows the Spanning Tree Protocol to be globally
disabled on the Switch.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
