D-Link DIR-853 User Manual Download

Page: 77 / 228

DIR-853

AC1300 MU-MIMO Wi-Fi Gigabit Router

with 3G/LTE Support and USB Port 3.0

User Manual

Configuring via Web-based Interface

Figure 62. The page for creating a new

Static IPv6

connection. The

IPv6

section.

Parameter

Description

IPv6

For

Static IPv6

type

IPv6 address

Enter an IPv6 address for this WAN connection.

Prefix

The length of the subnet prefix. The value

is used usually.

Gateway IPv6 address

Enter an IPv6 address of the gateway used by this WAN connection.

Primary IPv6 DNS

server/Secondary IPv6

DNS server

Enter addresses of the primary and secondary IPv6 DNS servers in
the relevant fields.

For

Dynamic IPv6

type

Get IPv6

Select a method for IPv6 address assignment from the drop-down
list or leave the

Automatically

value.

Gateway by SLAAC

Move the switch to the right to automatically assign the IPv6
gateway address with help of SLAAC (

Stateless Address

Autoconfiguration

Gateway IPv6 address

The address of the IPv6 gateway. The field is available for editing if
the

Gateway by SLAAC

switch is moved to the left.

Obtain DNS server

addresses

automatically

Move the switch to the right to configure automatic assignment of
IPv6 DNS server addresses. Upon that the

Primary IPv6 DNS

server

and

Secondary IPv6 DNS server

fields are not available

for editing.

Primary IPv6 DNS

server/Secondary IPv6

DNS server

Enter addresses of the primary and secondary IPv6 DNS servers in
the relevant fields.

Page

of 228

Summary of Contents for DIR-853





































































































































































































































Search results

Summary of Contents for DIR-853

Reviews:

Related manuals for DIR-853

Brands by name

Popular brands

D-Link DIR-853, User Manual

Search results

Summary of Contents for DIR-853

Reviews:

Related manuals for DIR-853

Brands by name

Popular brands