DIR-853
AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Configuring via Web-based Interface
Changing LAN IPv4 Address
This configuration step is available for the
Access point
,
Repeater
, and
Client
modes.
1. Select the
Automatic obtainment of IPv4 address
to let DIR-853 automatically obtain
the LAN IPv4 address.
2. In the
Hostname
field, you should specify a domain name of the router using which you
can access the web-based interface after finishing the Wizard. Enter a new domain name of
the router ending with
.local
or leave the value suggested by the router.
!
In order to access the web-based interface using the domain name, i
n the address bar of the
web browser,
enter the name of the router with a dot at the end.
If you want to manually assign the LAN IPv4 address for DIR-853, do not select the
Automatic
obtainment of IPv4 address
checkbox and fill in the
IP address
,
Subnet mask
,
Hostname
fields and, if needed, the
Gateway IP address
field. Make sure that the assigned address does not
coincide with the LAN IPv4 address of the router to which your device connects.
Figure 31. The page for
changing the LAN IPv4 address
.
3. Click the
NEXT
button to continue or click the
BACK
button to return to the previous page.
Page
44
of 228
