D-Link DIR-853 User Manual Download Page 21

Page: 21 / 228

DIR-853

AC1300 MU-MIMO Wi-Fi Gigabit Router

with 3G/LTE Support and USB Port 3.0

User Manual

Installation and Connection

Connecting to PC

PC with Ethernet Adapter

1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router

and the Ethernet port of your PC.

To connect via USB modem

: connect your USB modem to the USB port

located on the

front panel of the router.

In some cases you will need to reboot the router after connection of the USB modem.

3. Connect the power cord to the power connector port on the back panel of the router, then

plug the power adapter into an electrical outlet or power strip.

4. Turn on the router by pressing the

POWER

button on its back panel.

Then make sure that your PC is configured to obtain an IP address automatically (as DHCP client).

7 It is recommended to use a USB extension cable to connect a USB modem to the router.

Page

of 228

Summary of Contents for DIR-853





































































































































































































































Search results

Summary of Contents for DIR-853

Reviews:

Related manuals for DIR-853

Brands by name

Popular brands

D-Link DIR-853, User Manual

Search results

Summary of Contents for DIR-853

Reviews:

Related manuals for DIR-853

Brands by name

Popular brands