DIR-853
AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Configuring via Web-based Interface
In the
Static IP Addresses
section, you can specify MAC address and IPv6 address pairs (set a
fixed IPv6 address in the local area network for a device with a certain MAC address). The router
assigns IPv6 addresses in accordance with the specified pairs only when the
Stateful
value is
selected from the
Mode of dynamic IPv6 address assignment
drop-down list in the
Dynamic IPv6 Addresses
section.
Figure 91. The section for creating MAC-IPv6 pairs.
To create a MAC-IPv6 pair, click the
ADD
button (
). In the opened window, in the
IP address
field, enter an IPv6 address which will be assigned to the device from the LAN, then in the
MAC
address
field, enter the MAC address of this device. In the
Hostname
field, specify a network
name of the device for easier identification (
optional
). Click the
APPLY
button.
In order to view MAC addresses of the devices connected to the router at the moment, click the
CLIENTS LIST
button. In the opened window, select the needed device and click the
OK
button.
To view the latest list of the connected devices, click the
REFRESH
button.
To edit the settings for the existing MAC-IPv6 pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the
APPLY
button.
To remove a MAC-IPv6 pair, select the checkbox located to the left of the relevant line in the table
and click the
DELETE
button (
). Then click the
APPLY
button. Also you can remove a MAC-
IPv6 pair in the editing window.
Page
108
of 228
