DIR-853
AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Configuring via Web-based Interface
To enable the SkyDNS service, move the
Enable
switch to the right. Then in the
and
Password
fields, enter the account data (the e-mail address and the password correspondingly)
specified upon registration on the SkyDNS service web site. Click the
APPLY
button. The account
data (authorization status, the tariff used) and the
Default profile
drop-down list will be displayed
on the page. If needed, from the
Default profile
list, select another filtering profile which will be
used for all devices of your LAN and click the
APPLY
button again.
The default filtering profile will be applied to all devices newly connected to the router's network.
To change the parameters of your account on the SkyDNS service web site, click the
Go to
personal profile page
link.
By default, the account parameters are automatically synchronized with the SkyDNS service web
site once an hour. To start synchronization manually, click the
MANUALLY SYNC
button.
To use another account, specify its data in the
and
Password
fields and click the
APPLY
button.
To disable the SkyDNS service, move the
Enable
switch to the left.
Page
221
of 228
