D-Link DIR-853 User Manual Download

Page: 75 / 228

DIR-853

AC1300 MU-MIMO Wi-Fi Gigabit Router

with 3G/LTE Support and USB Port 3.0

User Manual

Configuring via Web-based Interface

Creating Dynamic IPv6 or Static IPv6 WAN Connection

On the connection creation page, go to the

All Settings

tab. Then select the relevant value from

the

Connection type

drop-down list and specify the needed values.

Figure 60. The page for creating a new

Static IPv6

connection. Selecting a connection type.

Parameter

Description

Enable connection

Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.

Connection name

Available for the advanced mode only.

A name for the connection for easier identification.

Page

of 228

Summary of Contents for DIR-853





































































































































































































































Search results

Summary of Contents for DIR-853

Reviews:

Related manuals for DIR-853

Brands by name

Popular brands

D-Link DIR-853, User Manual

Search results

Summary of Contents for DIR-853

Reviews:

Related manuals for DIR-853

Brands by name

Popular brands