DIR-853
AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Configuring via Web-based Interface
Parameter
Description
IPsec-SA lifetime
The lifetime of IPsec-SA keys in seconds. After the specified period it
is required to renegotiate the keys. Specify
0
if you don't want to limit
the lifetime of the keys.
If you need to specify IP addresses of local and remote subnets for creating a tunnel, click the
ADD
button (
) in the
Tunneled Networks
section.
Figure 154. The page for adding an IPsec tunnel. The window for adding a tunneled network.
In the opened window, you can specify the following parameters:
Parameter
Description
Local network
A local subnet IP address and mask.
Remote subnet
A remote subnet IP address and mask.
To edit fields in the
Tunneled Networks
section, select the relevant line in the table. In the
opened window, change the needed parameters and click the
SAVE
button.
To remove a subnet, select the checkbox located to the left of the relevant line in the table and click
the
DELETE
button (
). Also you can remove a subnet in the editing window.
After configuring all needed settings for the IPsec tunnel, click the
APPLY
button.
To edit the parameters of an existing tunnel, in the
Tunnels
section, select the relevant tunnel in the
table. On the opened page, change the needed parameters and click the
APPLY
button.
To remove an existing tunnel, select the checkbox located to the left of the relevant line in the table
and click the
DELETE
button (
). Also you can remove a tunnel on the editing page.
To disable VPN tunnels based on IPsec protocol, move the
Enable
switch to the left.
Page
188
of 228
