D-Link DIR-853 User Manual Download Page 62

Page: 62 / 228

DIR-853

AC1300 MU-MIMO Wi-Fi Gigabit Router

with 3G/LTE Support and USB Port 3.0

User Manual

Configuring via Web-based Interface

To deselect the port or wireless interface in the simple mode, left-click the selected element (the
frame will disappear) and click the

APPLY

button.

To deselect the port or wireless interface in the advanced mode, select the

value from the

Bridged with

drop-down list of the element corresponding to the needed LAN port or interface.

Then in the

WAN

section, select the connection via VLAN which will not be used any longer and

click the

DELETE

button. Then click the

APPLY

button.

Page

of 228

Summary of Contents for DIR-853





































































































































































































































Search results

Summary of Contents for DIR-853

Reviews:

Related manuals for DIR-853

Brands by name

Popular brands

D-Link DIR-853, User Manual

Search results

Summary of Contents for DIR-853

Reviews:

Related manuals for DIR-853

Brands by name

Popular brands