DIR-853
AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Configuring via Web-based Interface
CHAPTER 4. CONFIGURING VIA WEB-BASED
INTERFACE
Initial Configuration Wizard
To start the Initial Configuration Wizard, go to the
Initial Configuration
section. On the opened
page, click the
OK
button and wait until the factory default settings are restored.
Figure 18. Restoring the default settings in the Wizard.
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you
are connected to the wireless network of DIR-853 (see the WLAN name (SSID) on the barcode
label on the bottom panel of the device) and click the
NEXT
button.
Figure 19. Checking connection to the wireless network.
Click the
START
button.
Figure 20. Starting the Wizard.
Page
38
of 228
