DIR-853
AC1300 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port 3.0
User Manual
Configuring via Web-based Interface
In order to connect your device to a wireless ISP (WISP), on the
Device mode
page, from the
Connection method
list, select the
Wi-Fi
value. Then from the
Work mode
list select the
WISP Repeater
value. In this mode you can connect your device to another access point,
configure a WAN connection, set your own settings for the wireless network in the 2.4GHz and
5GHz bands, configure LAN ports to connect an STB or VoIP phone, and set your own password
for access to the web-based interface of the device.
Figure 25. Selecting an operation mode. The
WISP Repeater
mode.
In order to connect your device to a wired router for adding a wireless network to the existing local
network, on the
Device mode
page, from the
Connection method
list, select the
Wired
connection
value. Then from the
Work mode
list select the
Access point
value. In this mode
you can change the LAN IP address, set your own settings for the wireless network in the 2.4GHz
and 5GHz bands and set your own password for access to the web-based interface of the device.
Figure 26. Selecting an operation mode. The
Access point
mode.
Page
41
of 228
