D-Link DIR-853 User Manual Download Page 14

Page: 14 / 228

DIR-853

AC1300 MU-MIMO Wi-Fi Gigabit Router

with 3G/LTE Support and USB Port 3.0

User Manual

Overview

Product Appearance

Upper and Front Panels

Figure 1. Upper and front panels view.

LED

Mode

Description

POWER

Solid orange

The router is being loaded.

Solid blue

The router is powered on.

No light

The router is powered off.

INTERNET

Solid blue

•

The default wired WAN connection is on, or

•

the default 3G/LTE WAN connection is on.

Fast blinking blue

•

The default wired WAN connection is active, or

•

the default 3G/LTE WAN connection is active.

Blinking orange

•

The default wired WAN connection is off, or

•

there are no WAN connections created.

No light

The WAN cable is not connected.

WPS

Blinking blue

Attempting to add a wireless device via the WPS
function.

No light

The WPS function is not in use.

WLAN 2.4G

WLAN 5G

Solid blue

The router's WLAN of the relevant band is on.

Blinking blue

Data transfer through the Wi-Fi network of the relevant
band.

No light

The router's WLAN of the relevant band is off.

Page

of 228

Summary of Contents for DIR-853





































































































































































































































Search results

Summary of Contents for DIR-853

Reviews:

Related manuals for DIR-853

Brands by name

Popular brands

D-Link DIR-853, User Manual

Search results

Summary of Contents for DIR-853

Reviews:

Related manuals for DIR-853

Brands by name

Popular brands