D-Link DGS-3212SR, Command Line Interface Reference Manual

Page: 64 / 269

DGS-3212SR Layer 3 Gigabit Switch
disable snmp authenticate_traps
Purpose Used to disable SNMP authentication trap support.
Syntax disable snmp authenticate_traps
Description This command is used to disable SNMP authentication support on
the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable the SNMP authentication trap support:
DGS-3212SR:4#disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
DGS-3212SR:4#
config snmp system_contact
Purpose Used to enter the name of a contact person who is responsible for
the switch.
Syntax
config snmp system_contact{<sw_contact>}
Description The config snmp system_contact command is used to enter the
name and/or other information to identify a contact person who is
responsible for the switch. A maximum of 255 character can be
used.
Parameters <sw_contact> - A maximum of 255 characters is allowed. A NULL
string is accepted if there is no contact.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the switch contact to “
M I S D e p a r t m e n t I I
”:
52