D-Link DGS-3212SR, Command Line Interface Reference Manual

Page: 120 / 269

DGS-3212SR Layer 3 Gigabit Switch
Port RX Rate (Mbit/sec) TX_RATE (Mbit/sec)
---- ------------------------ ----------------------
1:1 no_limit 10
1:2 no_limit 10
1:3 no_limit 10
1:4 no_limit 10
1:5 no_limit 10
1:6 no_limit 10
1:7 no_limit 10
1:8 no_limit 10
1:9 no_limit 10
1:10 no_limit 10
DGS-3212SR:4#
config 802.1p user_priority
Purpose Used to map the 802.1p user priority tags of an incoming packet
to one of the eight hardware queues available on the switch.
Syntax config 802.1p user_priority <priority 0-7> <class_id 0-7>
Description
The config 802.1p user_priority command is used to configure
the way the switch will map an incoming packet, based on its
802.1p user priority tag, to one of the eight hardware priority
queues available on the switch. The switch’s default is to map the
incoming 802.1p priority values to the eight hardware priority
queues according to the following chart:
802.1p Switch Hardware
Value Priority Queue
--------- ------------------
0 2
1 0
2 1
3 3
4 4
5 5
6 6
108