D-Link DGS-3212SR, Command Line Interface Reference Manual

Page: 59 / 269

DGS-3212SR Layer 3 Gigabit Switch
delete snmp host
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete an SNMP host entry:
DGS-3212SR:4#delete snmp host 10.48.74.100 natas
Command: delete snmp host 10.48.74.100 natas
Success.
DGS-3212SR:4#
show snmp host
Purpose Used to display the recipient of SNMP traps generated by the
switch’s SNMP agent.
Syntax
show snmp host {<ipaddr>}
Description The show snmp host command is used to display the IP
addresses and configuration information of remote SNMP
managers that are designated as recipients of SNMP traps that
are generated by the switch’s SNMP agent.
Parameters
<ipaddr>
−
The IP address of a remote SNMP manager that will
receive SNMP traps generated by the switch’s SNMP agent.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the currently configured SNMP hosts on the switch:
DGS-3212SR:4#show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address SNMP Version Community Name/SNMPv3 User Name
--------------- --------------------- ------------------------------
10.48.76.23 V2c private
10.48.74.100 V3 authpriv public
Total Entries: 2
DGS-3212SR:4#
47