D-Link DGS-3212SR, Command Line Interface Reference Manual

Page: 136 / 269

DGS-3212SR Layer 3 Gigabit Switch
show vlan
Restrictions None.
Example usage:
To display the switch’s current VLAN settings:
DGS-3212SR:4#show vlan
Command: show vlan
VID : 1 VLAN Name : default
VLAN TYPE : static Advertisement : Enabled
Member ports : 1:1-1:11,2:1-2:11
Static ports : 1:1-1:11,2:1-2:11
Untagged ports : 1:1-1:11,2:1-2:11
Forbidden ports :
VID : 2 VLAN Name : v1
VLAN TYPE : static Advertisement : Disabled
Member ports : 1:12,2:12
Static ports : 1:12,2:12
Untagged ports :
Forbidden ports :
Total Entries : 2
DGS-3212SR:4#
show gvrp
Purpose Used to display the GVRP status for a port list on the switch.
Syntax
show gvrp {<portlist>}
Description This command displays the GVRP status for a port list on the
switch
Parameters
<portlist>
−
Specifies a range of ports for which the GVRP status
is to be displayed. The port list is specified by listing the lowest
switch number and the beginning port number on that switch,
separated by a colon. Then the highest switch number, and the
highest port number of the range (also separated by a colon) are
specified. The beginning and end of the port list range are
separated by a dash. For example, 1:3 specifies switch number 1,
port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all
of the ports between switch 1, port 3 and switch 2, port 4
−
in
124