D-Link DGS-3212SR, Command Line Interface Reference Manual

Page: 139 / 269

DGS-3212SR Layer 3 Gigabit Switch
create link_aggregation
static – This designates the aggregated port group as
static. Static port groups can not be changed as easily as
LACP compliant port groups since both linked devices must
be manually configured if the configuration of the trunked
group is changed. If static link aggregation is used, be sure
that both ends of the connection are properly configured and
that all ports have the same speed/duplex settings.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create a link aggregation group:
DGS-3212SR:4#create link_aggregation group_id 1
Command: create link_aggregation group_id 1
Success.
DGS-3212SR:4#
delete link_aggregation group_id
Purpose Used to delete a previously configured link aggregation group.
Syntax delete link_aggregation group_id <value 1-6>
Description This command is used to delete a previously configured link
aggregation group.
Parameters
<value 1-6>
−
Specifies the group ID. The switch allows up to 6 link
aggregation groups to be configured. The group number identifies
each of the groups.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete link aggregation group:
DGS-3212SR:4#delete link_aggregation group_id 6
Command: delete link_aggregation group_id 6
Success.
DGS-3212SR:4#
127