D-Link DGS-3212SR, Command Line Interface Reference Manual

Page: 50 / 269

DGS-3212SR Layer 3 Gigabit Switch
delete snmp view
Parameters
<view_name 32>
−
An alphanumeric string of up to 32 characters
that identifies the SNMP view to be deleted.
all
−
Specifies that all of the SNMP views on the switch will be
deleted.
<oid>
−
The object ID that identifies an object tree (MIB tree) that
will be deleted from the switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete a previously configured SNMP view from the switch:
DGS-3212SR:4#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
Success.
DGS-3212SR:4#
show snmp view
Purpose Used to display an SNMP view previously created on the switch.
Syntax show snmp view {<view_name 32>}
Description The show snmp view command displays an SNMP view
previously created on the switch.
Parameters
<view_name 32>
−
An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be displayed.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display SNMP view configuration:
DGS-3212SR:4#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name Subtree View Type
-------------------- ------------------------- ----------
ReadView 1 Included
WriteView 1 Included
NotifyView 1.3.6 Included
restricted 1.3.6.1.2.1.1 Included
restricted 1.3.6.1.2.1.11 Included
restricted 1.3.6.1.6.3.10.2.1 Included
restricted 1.3.6.1.6.3.11.2.1 Included
38