D-Link DGS-3212SR, Command Line Interface Reference Manual

Page: 22 / 269

DGS-3212SR Layer 3 Gigabit Switch
3
C
OMMAND
S
YNTAX
The following symbols are used to describe how command entries are made and values and arguments are specified in this
manual. The online help contained in the CLI and available through the console interface uses the same syntax.
Note : All commands are case-sensitive. Be sure to disable Caps Lock or
any other unwanted function that changes text case.
<angle brackets>
Purpose Encloses a variable or value that must be specified.
Syntax create fdb <vlan_name 32> <macaddr> port <port>
Description In the above syntax example, you must supply a VLAN name in
the
<vlan_name 32> space, the MAC address in the
<macaddr>, and the port number in the <port> space. Do not
type the angle brackets.
Example Command
create fdb vlan1 00-00-00-00-00-05 port 5
[square brackets]
Purpose Encloses a required value or set of required arguments. One
value or argument can be specified.
Syntax create account [admin | user]
Description In the above syntax example, you must specify either an admin
or a user level account to be created. Do not type the square
brackets.
Example Command create account admin
| vertical bar
Purpose Separates two or more mutually exclusive items in a list, one of
which must be entered.
Syntax
show snmp [community | detail]
Description In the above syntax example, you must specify either
community, or detail . Do not type the backslash.
Example Command show snmp community
10