D-Link DGS-3212SR, Command Line Interface Reference Manual

Page: 254 / 269

DGS-3212SR Layer 3 Gigabit Switch
config dst
s_date - Configure the specific date (day of the month) to begin DST.
e_date - Configure the specific date (day of the month) to begin DST.
offset [30 | 60 | 90 | 120] - Indicates number of minutes to add or to
subtract during the summertime. The possible offset times are
30,60,90,120. The default value is 60.
Restrictions Only administrator-level users can issue this command.
<start_date 1-31> - The start date is expressed numerically.
•
•
<end_date 1-31> - The end date is expressed numerically.
Example usage:
To configure daylight savings time on the switch:
DGS-3212SR:4#config dst repeating s_week 2 s_day tue s_mth 4
s_time 15:00 e_week 2 e_day wed e_mth 10 e_time 15:30 offset 30
Success.
Command: config dst repeating s_week 2 s_day tue s_mth 4 s_time
15:00 e_week 2 e_day wed e_mth 10 e_time 15:30 offset 30
DGS-3212SR:4#
show time
Purpose Used to display the current time settings and status.
Syntax show time
Description This will display system time and date configuration as well as
display current system time.
Parameters None.
Restrictions None.
Example usage:
To show the time currently set on the switch’s System clock:
242