D-Link DGS-3212SR Page 49 Command Line Interface Reference Manual Download

Page: 49 / 269

DGS-3212SR Layer 3 Gigabit Switch

initial initial V3 None None

Total Entries: 1

DGS-3212SR:4#

create snmp view

Purpose

Used to assign views to community strings to limit which MIB
objects and SNMP manager can access.

Syntax

create snmp view <view_name 32> <oid> view_type [included |
excluded]

Description The

create snmp view

command assigns views to community

strings to limit which MIB objects an SNMP manager can access.

Parameters

<view_name 32>

−

An alphanumeric string of up to 32 characters

that identifies the SNMP view that will be created.

<oid>

−

The object ID that identifies an object tree (MIB tree) that

will be included or excluded from access by an SNMP manager.

included

−

Include this object in the list of objects that an SNMP

manager can access.

excluded

−

Exclude this object from the list of objects that an SNMP

manager can access.

Restrictions Only

administrator-level users can issue this command.

Example usage:

To create an SNMP view:

DGS-3212SR:4#create snmp view dlinkview 1.3.6 view_type included
Command: create snmp view dlinkview 1.3.6 view_type included

Success.

DGS-3212SR:4#

delete snmp view

Purpose

Used to remove an SNMP view entry previously created on the
switch.

Syntax

delete snmp view <view_name 32> [all | <oid>]

Description

The

delete snmp view

command is used to remove an SNMP

view previously created on the switch.

Summary of Contents for DGS-3212SR














































































































































































































































































Search results

Summary of Contents for DGS-3212SR

Reviews:

Related manuals for DGS-3212SR

Brands by name

Popular brands

D-Link DGS-3212SR, Command Line Interface Reference Manual

Search results

Summary of Contents for DGS-3212SR

Reviews:

Related manuals for DGS-3212SR

Brands by name

Popular brands