D-Link DGS-3212SR, Command Line Interface Reference Manual

Page: 53 / 269

DGS-3212SR Layer 3 Gigabit Switch
show snmp community
SNMP managers access to MIB objects in the switch’s SNMP
agent.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the currently entered SNMP community strings:
DGS-3212SR:4#show snmp community
Command: show snmp community
SNMP Community Table
Community Name View Name Access Right
---------------------------- -------------------------------- ------------
dlink ReadView read_write
private CommunityView read_write
public CommunityView read_only
Total Entries: 3
DGS-3212SR:4#
config snmp engineID
Purpose Used to configure a name for the SNMP engine on the switch.
Syntax
config snmp engineID <snmp_engineID>
Description The config snmp engineID command configures a name for the
SNMP engine on the switch.
Parameters
<snmp_engineID>
−
An alphanumeric string that will be used to
identify the SNMP engine on the switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To give the SNMP agent on the switch the name “0035636666”
DGS-3212SR:4#config snmp engineID 0035636666
Command: config snmp engineID 0035636666
Success.
41