D-Link DGS-3212SR, Command Line Interface Reference Manual

Page: 262 / 269

DGS-3212SR Layer 3 Gigabit Switch
delete iproute default
switch’s IP routing table.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the default IP route 10.53.13.254:
DGS-3212SR:4#delete iproute default Command: delete iproute
default
Success.
DGS-3212SR:4#
show iproute
Purpose Used to display the switch’s current IP routing table.
Syntax show iproute {<network_address>} {static}
Description This command will display the switch’s current IP routing table.
Parameters
<network_address>
−
IP address and netmask of the IP interface
that is the destination of the route. You can specify the address
and mask information using the traditional format (for example,
10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).
static – Use this parameter to display static iproute entries.
Restrictions None.
Example Usage:
To display the contents of the IP routing table:
DGS-3212SR:4#show iproute
Command: show iproute
IP Address/Netmask Gateway Interface Hops Protocol
--------------- --------------- --------------- ---- -----------
0.0.0.0 10.1.1.254 System 1 Default
10.0.0.0 10.48.74.122 System 1 Local
Total Entries: 2
DGS-3212SR:4#
250