manualshive.com logo in svg

D-Link DGS-3212SR, Command Line Interface Reference Manual

The D-Link DGS-3212SR is a high-performance switch designed for seamless network connectivity. For enhanced user experience, it is equipped with a comprehensive Command Line Interface Reference Manual. This manual provides detailed instructions to configure and optimize switch settings. Download this manual for free from our website, ensuring hassle-free setup.

Share
Download
background image

DGS-3212SR Layer 3 Gigabit Switch

 

config stacking mode 

number of the range (also separated by a colon) are 
specified. The beginning and end of the port list range are 
separated by a dash. For example, 1:3 specifies switch 
number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-
2:4 specifies all of the ports between switch 1, port 3 and 
switch 2, port 4 

−

 in numerical order. 

Restrictions Only 

administrator-level users can issue this command. 

Usage Example 

 

To globally enable stacking: 

DGS-3212SR:4#config stacking mode enable  

Command: config stacking mode enable  

 

The new stacking mode configuration must be saved and the system 
restarted to put the new settings into effect. 

If you do not save the changes now,they will be lost. 

 

Do you want to save the new system configuration to NV-RAM and restart 
now?(y/n) 

It is necessary to save the stacking mode settings and restart the system. If you want to save and restart press Y. It will take a 
few minutes for the system to reboot. 

It is also possible to use any of the built-in combination ports for stacking. Follow the example below to enable stacking for a 
built-in port. 

To configure built-n port number 4 to function as a stacking port: 

DGS-3212SR:4#config stacking mode enable ports 4 

Command: config stacking mode enable ports 4 

 

The new stacking mode configuration must be saved and the system 
restarted to put the new settings into effect. 

If you do not save the changes now, they will be lost. 

 

Do you want to save the new system configuration to NV-RAM and 
restart now?(y/n) 

 

Success. 

 

DGS-3212SR:4# 

It is necessary to save the stacking mode settings and restart the system. If you want to save and restart press Y. It will take a 
few minutes for the system to reboot. 

show stacking 

 

222

Summary of Contents for DGS-3212SR














































































































































































































































































Reviews:

No comments

Related manuals for DGS-3212SR

Campbell Hausfeld CW301300AJ Operating Instructions And Parts Manual preview
CW301300AJ
Brand: Campbell Hausfeld Pages: 12
I-Tech M118 User Manual preview
M118
Brand: I-Tech Pages: 27
Alyseum MS-SW5 User Manual preview
MS-SW5
Brand: Alyseum Pages: 7
DANLERS TLSW HB Installation Notes preview
TLSW HB
Brand: DANLERS Pages: 2
Lindy 32351 Manual preview
32351
Brand: Lindy Pages: 70
Top View KVM-102U User Manual preview
KVM-102U
Brand: Top View Pages: 2
Harman AMX PR01-0808 User Manual preview
AMX PR01-0808
Brand: Harman Pages: 50
Tabs TBGW100-915 Reference Manual preview
TBGW100-915
Brand: Tabs Pages: 4
cable matters 201063 User Manual preview
201063
Brand: cable matters Pages: 12
Maiwe MISCOM7220G-4GF-16GT User Manual preview
MISCOM7220G-4GF-16GT
Brand: Maiwe Pages: 6
CAMBRIONIX U16S User Manual preview
U16S
Brand: CAMBRIONIX Pages: 37
SICK MSL Series Operating Instructions Manual preview
MSL Series
Brand: SICK Pages: 299
Konig KN-HDMIMAT20 Manual preview
KN-HDMIMAT20
Brand: Konig Pages: 52
I-Rocks IR-4650 Quick Installation Manual preview
IR-4650
Brand: I-Rocks Pages: 18
Hailink MX44NN00RK User Manual preview
MX44NN00RK
Brand: Hailink Pages: 6
Clare Controls CLIQ.mini Quick Start Manual preview
CLIQ.mini
Brand: Clare Controls Pages: 2
TeleAdapt ConferenceHub TA-6500 User Manual preview
ConferenceHub TA-6500
Brand: TeleAdapt Pages: 16
Greengate VNLW-P-1001-MV-N-W Installation Instructions Manual preview
VNLW-P-1001-MV-N-W
Brand: Greengate Pages: 2

Brands by name

Popular brands

Load more brands